ProFix —Fast & Temporary Roof Leak Repair
1-component MS Hybrid Polymer for fast and temporary repair of roof leaks on a wide variety of surfaces. Can be applied underwater — making it suitable for localised repairs where water cannot be fully removed before application. A localised repair product for professional contractors. Not a complete membrane system or a substitute for planned refurbishment.
Wet-substrate capable
MS Hybrid Polymer · UV resistant from 1mm · permanently elastic — current PDS required before specification
Composition
1-Component MS Hybrid Polymer
Function
Fast & Temporary Localised Repair
Application Capability
Can Be Applied Underwater
User Classification
Professional Users
ProFix Quick Answers
Forti Nova supports ProFix projects through technical assessment, product supply and specification guidance across the Prokol range.
What it is
What is ProFix?
ProFix is a 1-component MS Hybrid Polymer product for fast and temporary repair of roof leaks on a wide variety of surfaces. It is classified for professional use. It is not a complete roof waterproofing membrane and does not replace planned condition assessment or refurbishment.
What it is used for
What types of local repair may ProFix suit?
Fast and temporary repair of roof leaks on a wide variety of surfaces. Substrate-specific requirements, preparation and application conditions must be confirmed from the current PDS before specifying.
Underwater application
Can ProFix be applied underwater?
Yes — ProFix can be applied underwater for suitable fast and temporary localised repairs where water cannot be fully removed before application. This does not make ProFix a permanent underwater lining, a below-ground waterproofing membrane or a universal immersion-resistant coating. Substrate compatibility must be confirmed from the current PDS.
What it is not
What is ProFix not designed to replace?
It is not a complete roof membrane, a full refurbishment specification, a structural repair material, a traffic surface, a permanent continuous-immersion lining or a solution for widespread coating failure.
Root-cause investigation
Must the cause of the defect be investigated?
Yes. ProFix seals a localised visible defect. It does not diagnose or resolve the underlying cause. Recurring or widening leakage, structural cracking and active movement all require investigation.
Documented substrates
What substrates are documented?
The manufacturer describes a wide variety of surfaces. A specific confirmed substrate list is not available from the current public documentation. Confirm from the current PDS before specifying.
Primer requirements
Is primer required before applying ProFix?
Primer requirements are not specified in the currently available public documentation. Confirm from the current PDS or contact the technical team before application.
Application conditions
What application conditions apply?
Specific temperature, humidity and weather window requirements are not stated in the currently available public documentation. Confirm from the current Product Data Sheet before use.
Repair or system?
When is a complete system more appropriate?
Where continuous waterproofing of a roof area is needed, existing membrane has widespread failure, insulation is saturated, or structural defects are present, a complete refurbishment system is required.
After a ProFix repair
What should follow a ProFix repair?
Commission a full substrate condition survey to determine the appropriate long-term waterproofing specification. ProFix provides fast and temporary repair — not a long-term programme substitute.
Fast & Temporary. Localised. Roof Leak Repair.
ProFix occupies a precise role within the Prokol range: fast and temporary repair of roof leaks on a wide variety of surfaces. It is not a membrane system for open roof areas, not a substitute for complete refurbishment, and not a permanent immersion lining or universal emergency solution applicable to every defect type or substrate condition.
Localised Roof Leak Repair
ProFix is documented as a product for fast and temporary repair of roof leaks. The applicable scope, substrate types, preparation requirements and application method must be confirmed from the current Product Data Sheet before specifying.
Wide Variety of Surfaces
The manufacturer describes ProFix as suitable for a wide variety of surfaces. Specific substrate lists, compatibility requirements and primer guidance are not available in the current public documentation and should be confirmed from the current PDS.
Interim Protection Pending Assessment
Where a full refurbishment cannot be immediately mobilised, a fast and temporary repair product may provide interim protection. The underlying defect cause must still be investigated and a full assessment and refurbishment specification commissioned.
Professional Use Classification
The SDS classifies ProFix for professional users. Application by competent professional contractors is required. Technical assessment guidance, specification support and product supply are available through the Forti Nova technical team.
ProFix or a Complete Membrane System?
ProFix — Fast & Temporary Repair
For localised roof leak repair on a wide variety of surfaces where a fast and temporary repair is required pending full assessment or refurbishment. Confirm substrates, preparation and application conditions from the current PDS.
HBS200 / SprayGrade / Monoseal — Complete Systems
For continuous waterproofing of suitable roof areas, gutters and large surfaces where a full bonded membrane is required. Complete substrate assessment, preparation and system specification must precede application.
Sealing the Visible Defect Does Not Remove the Cause
A ProFix repair addresses a localised visible defect. It does not diagnose or resolve underlying substrate condition, structural movement, drainage failure, saturated insulation or widespread membrane breakdown. A full condition survey should follow once conditions permit. Inspection Checklist →
When is ProFix the right specification?
ProFix is appropriate where the scope is a localised roof leak defect requiring fast and temporary repair. It is not appropriate where the scope requires continuous waterproofing of a roof area, structural repair, or resolution of widespread coating or substrate failure.
Always Confirm
Substrate requirements, preparation, primer and application conditions must be confirmed from the current Product Data Sheet before specifying or applying ProFix.
Potentially Suitable
Subject to substrate condition, preparation, primer requirements and repair assessment. Confirm from current PDS.
- Localised roof leak repair on suitable prepared surfaces
- Wide variety of surfaces as documented by the manufacturer
- Application underwater for suitable localised repairs, subject to substrate compatibility, preparation and the confirmed repair specification
- Fast and temporary repair pending full condition assessment
- Localised defects where a repair product is confirmed appropriate
Not Suitable Without Specific Confirmation
- Continuous waterproofing of open roof areas
- Replacement of a complete membrane specification
- Structural defect repair or failed-substrate remediation
- Widespread membrane or coating failure
- Saturated insulation or build-up concealment
- Traffic-bearing or wearing surfaces
- Permanent continuous-immersion lining or chemical lining
- Below-ground waterproofing membrane (full system)
- Unresolved active joint movement or structural cracking
- Repeat leaks where root cause is unresolved
Before Specifying ProFix
- Confirm scope is localised — not full-area waterproofing
- Confirm substrate from current PDS
- Confirm primer requirements from current PDS
- Confirm application conditions from current PDS
- Assess whether root cause requires wider investigation
- Establish interim or permanent role for this repair
After a ProFix Repair
- Commission a full condition survey of the wider area
- Determine whether a complete membrane system is required
- Assess substrate moisture and structural integrity
- Investigate repeat or nearby leakage
- Plan refurbishment before the next exposure period
- Do not rely on a temporary repair as long-term waterproofing
Possible Repair Failure Indicators
Observed symptoms requiring further investigation — not remote diagnoses.
Repair lifts at the edge
Possible contributing causes: contamination in the bonding zone, inadequate preparation, incompatible surface, or surface movement.
Required Investigation
Assess preparation quality, substrate compatibility and surface movement before reapplying.
Water ingress returns at or near the repaired area
Possible contributing causes: defect extends beyond the repaired area, active movement or cracking beneath the repair, or an adjacent unrelated defect.
Required Investigation
Commission a wider condition survey. The visible defect may not be the only ingress route.
Repair remains soft or does not achieve expected cure
Possible contributing causes: application temperature or humidity outside the specified range, contaminated substrate, or product outside shelf life.
Required Investigation
Confirm current application conditions from the PDS. Check product storage and age.
Verified Data
Values shown are from verified public documentation. Full technical data is available on request.
- Article Number
- 18063
- Composition
- 1-component MS Hybrid Polymer (mixture of pigments and polymers)
- Classified Use
- Professional users — Roof coating
- Surface Suitability
- Wide variety of surfaces. Confirm specific substrates, preparation and primer requirements from current PDS.
- Storage Temperature
- 5°C minimum — 30°C maximum
- Shelf Life
- 12 months (from date of manufacture, in original unopened packaging)
- Packaging
- 1.5 kg / 4 kg / 11 kg
Application — Confirm Current PDS
Underwater Application
ProFix can be applied underwater for suitable fast and temporary localised repairs where water cannot be fully removed before application. This does not make ProFix a permanent underwater lining, a below-ground waterproofing membrane, or a universal immersion-resistant coating. Substrate compatibility and preparation requirements must be confirmed from the current PDS before application.
The following additional technical parameters must be confirmed from the current Product Data Sheet before specification or application:
- Application method and tools
- Surface preparation requirements
- Primer requirements and compatibility
- Minimum and maximum application temperature
- Relative humidity and dew-point requirements
- Working time, skin-over time, cure time
- Recoat time and service-return time
- Coverage rate and consumption
- Layer thickness requirements
- Weather window and conditions
Request the current PDS: Contact the Forti Nova technical team to receive the current ProFix Product Data Sheet before specifying or applying this product.
Safety — SDS Classification
The ProFix SDS (article 18063, Version 1) confirms: the product is not classified as hazardous according to CLP Regulation (EC) No 1272/2008. However, the SDS carries supplementary statements that apply to all users:
- EUH208: Contains Trimethoxyvinylsilane and N-(3-(trimethoxysilyl)propyl)ethylenediamine — may produce an allergic reaction
- EUH210: Safety Data Sheet available on request
- EUH211: Warning — hazardous respirable droplets may form when sprayed. Do not breathe spray or mist.
- Current SDS must be available on site prior to application
- COSHH assessment required before application commences
Application Support
Technical Assessment & Product Guidance
ProFix is classified for professional use. Submit project details for technical assessment, PDS access and specification guidance.
Confirm the current PDS
Application method, substrate list, primer requirements, cure times and application conditions are not available in public documentation — obtain the current PDS before specifying.
Assess the defect cause
Confirm whether the defect is genuinely localised or whether it indicates a wider substrate, structural or drainage problem before applying a repair product.
Professional use classification
The SDS identifies ProFix for professional users. Application should be carried out by competent professional contractors familiar with the product requirements.
SDS and COSHH on site
The current Safety Data Sheet must be available on site. A site-specific COSHH assessment must be in place before application commences.
Plan full assessment after repair
A fast and temporary repair is an interim measure. A full condition survey and refurbishment specification should follow.
Gallery & Documents
Project imagery showing localised repair and detail sealing work. Individual product identity in images has not been independently verified.
Repair sealant applied to metal roof seam and detail
Sealant application around roof skylight and penetration detail
Localised repair applied to vent penetration on commercial roof
Repair product applied to corrugated metal roof
Detail sealing on metal roof with visible repair area
Localised repair application on mixed-substrate roof surface
Repair sealant applied to roof light and glass penetration detail
Contractor applying repair sealant to localised roof defect
Repair sealant applied to roof edge detail
Gutter junction and fascia detail sealing work
Repair sealant applied to residential roof surface
Localised repair applied to flat roof penetrations and details
Technical Documentation
ProFix Technical Documentation — Available on Request
Technical Data Sheets, Safety Data Sheets and application guidance are available directly from our technical team. Email Info@FortiNova.co.uk with the product name and document type required.
ProFix — Technical Information
ProFix — Product Data Sheet (Article 18063)
Available on request — contact the Forti Nova technical team. Confirm current revision before application.
ProFix — Safety Data Sheet (Article 18063, Version 1)
Available to download. Confirm this is the current version before use. SDS must be available on site prior to application.
Application Guidance
Available on request — contact the Forti Nova technical team.
Related Systems
Important: All technical datasheets and safety documentation must be reviewed prior to specification and installation. Any warranty is project-specific and conditional on full compliance with manufacturer application requirements and trained approved applicator installation.
ProFix Common Questions
Specification intelligence for contractors, specifiers and facilities managers.
Discuss a ProFix Repair
Submit the defect location, substrate, approximate repair area, photographs and any history of recurring leakage for technical assessment guidance and system-selection support.
Technical Assessment Guidance
Repair scope and system suitability reviewed. Current PDS provided for confirmed application requirements.
Specification Support
Substrate assessment, preparation requirements and product supply confirmed for your project.
Refurbishment Pathway
Full system assessment and complete specification coordinated where the asset condition requires it.
Technical assessment guidance does not constitute formal structural engineering opinion, PI-backed specification design or guaranteed leak identification. Assessment is advisory and based on information submitted.
Technical Guidance & Product Access
ProFix is classified for professional use. The current Product Data Sheet, Safety Data Sheet and application guidance are available through the Forti Nova technical team. Do not apply ProFix without first obtaining and reading the current PDS.
No formal manufacturer-approved applicator training programme for ProFix specifically has been identified in the currently available documentation. Competent professional contractor application is required. Contact the technical team to discuss application guidance and support for your project.
Wider Refurbishment Specification
Where ProFix interim repair indicates that a wider refurbishment is required, Forti Nova can provide technical assessment and specification guidance for complete waterproofing systems including Monoseal, HBS200, SprayGrade and Rocathaan HotSpray PA 260-FR.
Contact Technical TeamLocalised repair or full refurbishment?
Submit defect details for technical assessment guidance and system-selection support.